Gas Hoses

	MecserflexTech

		Technical Q&A ON Our Product Range

Mecserflex Standard Range unbraided
commercial catering Gas Connectors have
been setting the standard for 15 years. They
were the first to achieve British Standard
Kitemark recognition and are fully certified
to BS669 Part 2 1997.
They are available in 1/2”, 3/4” & 1” Bore
Sizes and lengths between 500mm &
1500mm. A quick release coupling, full
restraining kit & comprehensive fitting
instruction are provided.


	Q.

		A.


		Can I buy the restraining kit as a separate item?

	Yes

	Standard & Premier Ranges	Flexmaster Ranges
30”	RW30-KIT (for 1m hoses)	RWF30-KIT (for 1m hoses)
36”	RW36-KIT (for 1.25m hoses)	RWF36-KIT (for 1.25m hoses)
42”	RW42-KIT (for 1.5m hoses)	RWF42-KIT (for 1.5m hoses)
48”	RW48-KIT for 1.5m hoses)	RWF48-KIT for 1.5m hoses)


	Q.


	What are the BTU & KW ratings for your gas hoses?


	A.

The heating value of Mecserflex flexible gas connectors has been determined under test conditions specified in BS:669 part 2 1997 using G20 reference gas of specific gravity of 0.555 and a pressure drop of 0.58mbar. The results are the same for braided (Premier Range) and unbraided (Standard Range) assemblies using Mecserflex quick disconnect coupling.


	Q.

Size	KW	BTU
1/2”	21.9	75,000
3/4”	53.9	181,000
1”	86.3	294,000


	How far do your swivels, swivel?


	A.

Our range of swivels move freely across both planes 360 degrees.

They are available in two sizes and two types:


	Q.

Style	1/2”	3/4”
Male/Female	SW12-MF	SW12-MF
Male/Male	SW12-MM	SW12-MM
SET	SW12-SET	SW19-SET


	Can I fold your gas hoses in the style of the letter “ n “ rather than a “ u “ as in your specification book?


	A.


	Gas hoses should be installed correctly to prevent damage to the hose and leakage.

Click Below for the ‘Installation Instructions’.


	[Home] [About Us] [Contact Us] [FAQ] [Gas Hoses] [Water Hoses] [EGO] [PRU's] [ECS] [Taps] [Robertshaw] [TO MACS] [TO CRPC]